Guide to Electrical inline surge suppressor for your RV

An electrical inline surge suppressor rv is used to protect the electrical and electronic equipment of the RV or your camper vehicle. You may be on a road trip to your favorite camping site. And you are parked at an RV station and plugged your RV to the power source of the resting station. But the power source could be unstable and faulty.

It can cause your electrical components of the RV a catastrophic failure. So installing a surge suppressor to your RV would be a smart choice for most people. Here are some of the basic knowledge about the electrical inline surge suppressor rv.


  1. What is an electrical inline surge suppressor for RV?

The surge protector for the electric components of a Recreational Vehicle or the RV is an electric stabilizer installed in the RV power inlet. It protects the RV’s electronics and electric components from a voltage fluctuation related damage. If the voltage is too high, it will help stabilize that and stop the electrical components from getting fried.

On the other hand, if the voltage is too low, it could be damaging too. So the surge protector is basically a regulating and self-protecting device that protects the internal equipment of the RV safe from various electric anomalies like, voltage fluctuations, open ground, open neutral, etc.



  1. How does an electrical inline surge suppressor for an RV work?

So far it sounds quite promising, right? But if you are a technical know-all guy, you might want to know about the working mechanism of the surge protector. It works by blocking the overflow of current that is coming from a faulty power source. It can protect the RV and the electrical and electronic components of it from fluctuation of voltage. The surge protectors are usually found in two options.

One is 50 amperes, and another is 30 amperes. You use it by plugging it into the power pedestal that is usually found in the camping sites or RV charging stations by the roadside rest areas across the country.

The surge protector can check for reverse polarity, open ground, open neutral, etc. and prevent any unforeseen accidents from happening. The surge protector can also monitor, voltage, frequency, grounding of the electrical wires, and many other factors to protect the RV from electrical surges.

Overall, the system works by monitoring the power condition and inform you of the current status of the electricity flow. The protector can cut the power in case of a power surge or other electrical hazards. Some models even have the automatic restoration feature depending on the price and model.



  1. Do you really need an electrical inline surge suppressor for your RV?

In short, the answer is yes; you do need it. If you are the type of person who is roaming around the country with your camper and staying in different camping grounds, you are bound to find some of the outlets that are out of date and not maintained properly. These are the perfect place to fry the electric and electronic components of your RV if you are not careful. It is obvious that some people will claim that they have never used a surge protector in years and they have never experienced any problem whatsoever.

But there are people who plugged their brand new RV to an outlet, and it burnt their whole rig in a second. It takes only one bad outlet, and your RV is out of service with no electrician around for miles. The campground owners can be a pain in the behind too. Most of them don’t have any headache about the safety of an RV owners rig. They just care about the money. If your rig fries by their faulty outlet, guess who is not at fault?

It’s the campground owner obviously. So better get a surge suppressor and be on the safe side and avoid any possible disaster on your relaxing trip. That way you don’t have to bargain about the liability issue with the campground owner or the management of a roadside rest area.


  1. Pros of an electrical inline surge suppressor

The electrical inline surge suppressor rv has a lot of advantages that might save you a fortune. Because if the electronics of your RV is fried, like the refrigerator, TV, computer, oven, etc., you are going to have to pay thousands of dollars to repair or buy them again. A simple surge protector would be able to save that money of yours. The surge protector is universal in nature.

So you can use it on any campground location or any of the roadside rest area for RVs. The surge protector can come with a built-in digital or analog display for a live readout about the condition of the electricity flow of the outlet. The electrical inline surge suppressor can cut out the power of the outlet from flowing to prevent any damage of the rigs electrical and electronic components. The surge protector is also very portable and easy to install anywhere. There are plenty of models to choose from in the market depending on your budget and requirements.



  1. Cons of an electrical inline surge suppressor

There are very few cons of a surge protector. The EMS or the Electrical Management System can be an alternative to the surge suppressor. The EMS can provide all-round coverage of the prevention of electrical abnormality. The surge protector can only deal with the situation and take emergency measures.

The electrical inline surge suppressor is a must to keep on your next road trip or camping trip. You never know what kind of power source you are going to end up getting in the campground or the rest area on the way to the campground. So it is definitely recommended to get an electric inline surge suppressor for your beloved RV and enjoy the trip and adventure without any hassle.


Posted in: RVs

Leave a Reply

Your email address will not be published. Required fields are marked *