While kayaking you are likely to be wet.
You need kayak drip rings you can avoid the splashes coming your way.
They are made of rubber rings you can fasten them to the last part of the paddle. However, water lovers might not like the idea of using the drip rings as they welcome the water splashes with a smile.
Learn the varied stroke types to get the maximum benefit out of your drip rings. With simple water gravity action if the shaft is more horizontal while you paddle you are likely to splash less water on yourself. While the shaft is vertical you might end up getting more water on your lap. So if you know the right stroke then you don’t need the drip rings or else you need them.
Wrong Position Of Drip Rings
Keeping the position of drip rings they might let more water splash on you. Say for example if you set them nearer to your paddles you can scoop more water. This means the rings are going to do more damage than good. Ensure you don’t set them near your kayak for safety reasons even. Drip rings work effectively if you can set them measuring a few distances from your kayak paddle. One great way to set the distance is to measure 1-2 hand widths off from the blade.
Considering these points will help you judge whether or not you need kayak drip rings. They are advantageous to reduce the water level that can drip while you paddle. To get the best from your drip rings you should recognize the paddling techniques.
Leisurely paddlers prefer paddling at lower angles. In this position, the top hand of a paddler stays underneath the level of his/her shoulder. As you have understood from the scenario this paddling style needs longer paddles. And your stroke angle let the paddle blades enter the water from your kayak away further.
Water dripping at a lower angle paddling goes slower from blade to the shaft and then to you. Having drip rings in the end you can easily stop these slow-moving splashes and sending back to where they come from.
Aggressive paddlers prefer strokes at high angles. Here the top hand of kayaker stays above the level of his/her shoulder. Just opposite to low-angle strokes this needs a shorter paddle and stroke angle to let the water inside the kayak.
There is high probability water running out from the blade exceeds the design capacity. Water easily can fill the rubber ring then onto the kayaker or inside the cockpit.
From the points above you have known that the paddling technique does matter for your drip rings to work effectively. Often newbies face the problem of poor paddling practices and water bypasses their drip rings. Getting a few lessons from an expert kayaker and practices you can learn the good techniques and learn how to use the drip rings.
This is again a vital point for your kayak drip rings to work or not effectively. The proper length of paddling depends upon the following checklists:
Kayak Type the Kayaker is using (Sit on top or Sit in)
Paddling Stroke Type
Inappropriate Sized Paddles
Using short paddles can let you take strokes at a high angle. And as it has already been discussed, such strokes go above the drip ring’s design capacity letting the water inside your kayak.
With a long paddle, the drip rings might fail to work again. To compensate for this damage you can move away from the drip rings off from the blade. And do watch your stroke as the blade can welcome the water in.
Winds V/S Drip Rings
Considering this situation again your drip rings might lose worth against the winds. Say for example winds can drip water in your kayak or you falling back again into the water. So just check if you want to set drip rings or not.
Another considerate point is the proper installation or adjustment of your drip rings. You are lucky enough as it is easy installing or adjusting them. You might not require installing kayak drip rings as most of them come installed. Only you need to do minor adjustments. Here is how you can install or adjust the different drip rings.
Yes definitely check the weather to help you decide whether or not to get the drip rings. Say for example it is a fine summer morning with the sun up and you decide kayak then definitely you won’t mind some of the splashes. But during winters you might not like the idea of getting wet. On the contrary, you might enjoy the splashes even during winters. So it depends upon your personal choice to use the drip rings or not.
Solid Design Drip Rings
Pressure Mounted Drip Rings are tough to stay firm with NO extra hardware. Just take apart the 2-piece paddle and let them slip down in the direction of paddling blade. You can easily adjust these drip rings without additional tools or hardware.
Zip-Tie Mounted Drip Rings are solidly designed but need zip-ties to be in one place. If you need to make adjustments then you might have to purchase new zip-ties.
Slip Design Drip Rings
- Slip Bolt Closure Drip Rings above the shaft & bolt them to keep firm. For adjustment lose the bolt and tight again.
- Slip Snap Closure Drip Rings above the shaft so that the ring ends split snap jointly to fasten the ring in one place. Easy to adjust and yes you will need the help of extra tool or hardware for the same.
Having kayak drip rings can prevent the water from splashes coming towards you or your kayak. Using them often depends upon your personal choice and paddling style. But if you want to stay dry then definitely you need them. Enjoy Kayaking!
Doubtful about whether or not you kayak drip rings while kayaking. Well, few things are reading which you can judge yourself and get an answer.